Anxi, Fujian · since 2002
Flexible packaging built around the fill, not the catalogue
Printed roll film, stand-up and flat-bottom pouches, spout pouches and large-format pet food bags — printed, laminated and converted in one plant, so the structure and the print are decided together.
Food-contact structures to FDA, EU 10/2011 and GB 4806 as applicable to your market. No prices published — every quote follows a specification.
Six families, one plant
Each family exists because a fill needed something the format above it could not do. Pick the one that matches the product; the structure follows from there.
Roll Film for Automatic Packaging
Gravure-printed roll stock for form-fill-seal lines: consistent repeat length, stable COF and a seal that runs at machine speed.
View family →
Stand-Up & Spout Pouches
Doypack, flat-bottom and spout pouches with zipper, valve or retort construction — the shelf presence of a rigid pack at a fraction of the weight.
View family →
Gusset, Flat & Pillow Bags
Side-gusset, three-side-seal, back-seal and pillow bags for coffee, tea, frozen food, powders and hardware.
View family →
Pet Food Packaging
High-barrier, grease-resistant packaging for dry kibble, treats, wet food and supplements — the segment we have focused on for 25 years.
View family →
High-Barrier Structures
Barrier laminates built around aluminium foil, metallised PET and EVOH, specified against an oxygen and moisture target rather than a material name.
View family →
Recyclable & Mono-Material
Design-for-recycling structures that keep the pack inside a single material stream — with an honest account of what changes on the filling line.
View family →What the plant actually runs
A specification is only as good as the process behind it — and every process has a limit worth stating.
9-colour gravure
Chosen over flexo because it holds dense solid colour and fine detail on metallised and foil substrates. The trade-off is cylinder cost: gravure pays from a certain run length upwards, and we say so when a project sits below it.
Solvent-free lamination
Lamination runs behind the press in the same building, so a structure change and a print change are evaluated together rather than in sequence.
Bag-making in-house
Doypack, flat-bottom, spout, side-gusset, three-side-seal and pillow. Zipper, valve, notch and hang-hole options are set on the machine — agreed before print, not after.
Applications
Pet food is where the technical work started; the same structures now serve snacks, coffee, frozen food, powders and household products.
Pet Food
Kibble, treats, wet food and supplements: grease-resistant structures, reclosure that survives, and pallet-stable formats.
Snacks & Confectionery
High-speed roll stock and pouches for crisps, nuts, biscuits, candy and chocolate — with the barrier each one needs.
Coffee & Tea
Valve bags, flat-bottom pouches and foil laminates that protect aroma through distribution and after opening.
Frozen & Chilled
Nylon-toughened laminates that survive low temperature, vacuum draw and puncture from the product itself.
Powders & Dry Mix
Static-controlled films, strong seals and clean-fill formats for powders, mixes and nutritional products.
Household & Personal Care
Refill pouches, spout packs and high-strength laminates for detergents, cleaners, wipes and personal care.
How a project runs
Four steps, and the first one decides the other three.
Brief
Machine, bag size, fill, weight, barrier target and market. Eight numbers; without them a quote is a guess.
Structure
A laminate and seal layer proposed against the fill, with the trade-offs written down.
Trial
A printed trial roll or short bag run, tested on your machine — not on a lab sealer.
Production
Batch records, retained samples, inspection report and loading photographs with every shipment.
Pet food is the segment we know best
Twenty-five years of kibble bags teaches a specific set of lessons: fat migrates into the adhesive, kibble edges puncture, and a pack that does not stand on the shelf does not sell. Those lessons shaped the structures the whole range now uses.
Pet food packaging →
Guides for the person signing off the spec
Specifying Printed Roll Film for a Form-Fill-Seal Line
The eight numbers a printer needs before quoting roll film, and why each one changes the structure rather than just the price.
Flat-Bottom vs Stand-Up Pouch: Choosing the Shelf Format
A practical comparison of box pouches and doypacks on shelf presence, pallet efficiency, material cost and line speed.
Why Pet Food Bags Delaminate at the Seal
Fat migration, seal contamination and flex cracking: the three mechanisms behind pet food bag failures, and how to design them out.
Questions buyers ask first
What kind of packaging do you make?
Flexible packaging: printed roll film for automatic packaging machines, stand-up and flat-bottom pouches, spout pouches, side-gusset bags, three-side-seal sachets and large-format pet food bags.
What is the minimum order?
It depends on the format and the print. Gravure cylinders are the fixed cost, so the economical run length follows from the cylinder charge rather than from a flat minimum. The figure is quoted per project.
Can you match a pack we already buy?
Yes, on structure and performance. We will not copy another brand's artwork, but we can match the laminate, the format and the finish, and improve the seal window where the current pack is marginal.
Which food-contact standards do you work to?
Materials are selected against FDA, EU 10/2011 and GB 4806 as applicable to the market where the pack is sold, and the declaration of compliance is issued with the order.
How long does a first order take?
Print and structure are approved on a trial roll, then production. The variable is the cylinder lead time on a new design, which is why the artwork stage sets the schedule.
Do you supply unprinted film?
Yes. Unprinted structures are supplied for converters and fillers who print in-house, on the same laminates used for the printed range.
Send the fill, the format and the machine
The reply is a proposed structure, a thickness and a trial roll — not a price list.